World Sailing Cup Miami 1,2,3


IFDS Worlds 1,2


OCR Miami 1,2,3
SOF Hyeres 1,2,3
Delta Lloyd 1,2,3
IFDS Worlds 1,2,3


SOF, Hyeres 1,2,3
IFDS Worlds1,2,3


Paralympics 1,2,3
OCR Miami
SOF, Hyeres 1,2,3
Sail for Gold 1,2,3


OCR Miami 1,2,3
SOF 1,2,3
Sail for Gold 1,2,3


OCR Miami 1,2,3
SOF 1,2,3
Sail for Gold 1,2,3

Follow Us!


Mainsail (PFM-2) 2012 Paralympic Champion!

After many hours of testing North Sails have developed the perfect Sonar mainsail for the Paralympic teams. Because they are not allowed to hike, the Paralympic crews generate less righting moment, and therefore need a flatter mainsail design, than their unrestricted contemporaries. The North PFM-2 Sonar Mainsail won the 2012 Paralympics with a race to spare. Although designed flatter than the Supermain+, great attention was paid to the leech to make sure it works for the crew all the way through the wind range. Our cross cut PFM-2 is constructed using Contender 5.46 Polykote Dacron. The sail comes complete with vision windows, insignia, sail numbers, class royalty label and sail bag.

For prices and more information contact our Sonar Experts or your

Mainsail (Super+) 2011 World Champion!

Our updated SuperMain+ is the most versatile main in the class providing excellent light air performance and dominating speed in breezy conditions. A true all-around mainsail! The improved design of the Super Main + will improve your flat water and light air performance! This new design allows the top of the main to stay open and flowing in light air while still providing enough punch in the leech to enable you to point with the best of them. Our cross cut Sonar Super Main + is constructed out of North Cloth 5.5 ounce Olympic Dacron. This yarn-tempered, balanced construction cloth proves to be the fastest most durable fabric for this main which, with it's large roach and low aspect design, proves to be quite a lot of fun to trim. The sail comes complete with vision windows, insignia, sail numbers, class royalty label and sail bag.

For prices and more information contact our Sonar Experts or your

Jib (AP++) 2011 World Champion!

The jib of choice for many Sonar champions the AP++ allows teams to count on one jib design for superior performance from 0-25MPH!!! Features a forgiving, fast shape that allows it to be the best all-purpose jib available! Our cross cut All-Purpose Plus Plus Jib has won countless North American and Midwinter titles. It's forgiving shape allows the helmsman to easily concentrate on going fast while allowing the jib trimmer to be an integral part of the boat's speed. It is manufactured from Dacron 4.46 Polykote and comes complete with window, tell tails and sail bag.

For prices and more information contact our Sonar Experts or your

Spinnaker (SL) 2011 World Champion!

Our proven all-purpose performing Full Radial design covers a wide range of sailing conditions. This one spinnaker covers all conditions so you are certain to always have the right spinnaker tied on! The Sonar Radial Light Spinnaker, designed by Ched Proctor, was introduced as the one spinnaker to cover a wide range of sailing conditions. This full radial spinnaker is a great reacher, while truly excelling in broad reaching and running on the windward/leeward courses frequently raced by Sonars.It is manufactured from Airx 600.

For prices and more information contact our Sonar Experts or your

This comprehensive tuning guide will give you the key information needed to stay in the front of the Sonar Fleet whether you are sailing at local or national level. Our sails are designed with proven technology in cloth as well as shape to insure durability and speed on the race course. Our sails are also designed to keep things simple in order to give you the confidence that is needed to keep your head out of the boat while sailing in close One Design competition.

Before Stepping Mast

1. Forestay should be 25' 11" when measured from the bearing point of the Tee fitting aloft to the centre of the turnbuckle clevis pin.

2. Clean and lubricate turnbuckles.

3. Spreader angle, set deflection at 2 3/4 - 3" (To get proper deflection measure from the back face of the mast to a line extending between the holes in the spreader tips, this distance should be 2 3/4 - 3").

After Stepping Mast

1. Adjust partner to fit snugly side to side (so mast is centred.)

2. Mast step, measure the distance from the aft face of the mast where it meets the step casting to the gel-coat edge of the centre of the cabin opening lip near the floor. This should be set between 28 1/4" and 28 3/4". (Ontario boats only).

3. Next, measure the distance from the forward edge of the mast partner opening to the centre of the headstay anchor point. The class rule limits this dance to 7' 11.5".

Fine Tuning the Rig

1. Centre the mast laterally using a tape measure on the jib halyard to a common spot on the port and starboard rails.

2. Remove any mast blocks as well as the lower shrouds from the chainplates.

3. Remove the slack from the backstay until the headstay just becomes taut (no mast bend). Place a mark on the deck abeam of the aft face of the mast. This is your reference point in the relaxed state.

4. Now pre-bend your mast at the deck with mast blocks on the aft side until you have moved the mast 1" forward of the mark. Make a new mark and erase the old. This is the new "Neutral" position.

5. Next, you want to tension your upper shrouds in equal increments on both sides to between 230-260 pounds using a "LOOS-Model A" tension gauge (cable size is 5/32" or equivalent). See Tension Gauge Conversion Chart. Check the mast laterally again by repeating step #l.

6. Finally you want to attach the lower shrouds and adjust them so that you can make 8 to 10" circles with them at shoulder height. This requires some guess work but loose lowers are required to keep the tip of the mast in column when you are sailing. Minor adjustments should be made to your lowers when you first go sailing by sighting up the mast track and tightening or loosening the lowers to keep the rig straight. Now you have a great starting point and adjustments will be made from and relative to this position depending on different wind strengths and sea conditions.

Trimming your North Sonar Sails

It's important to mark all your shrouds, sheets, tracks, outhaul, backstay, etc. Keep records of your tuning set-ups for different conditions in order to be able to reproduce settings when you know the boat is going fast.


You want to make six 1/2" wide plastic blocks from the template shown below, this will give you the proper amount of blocks to take up the extra space and allow you to block the mast according to our chart. Blocking is measured from the aft face of the mast relative to the neutral position.

Blocking Positions

  • Mast blocking has two profound effects. First, the more blocks you put behind the mast the less headstay tension you will have and the more the headstay will sag. This results in a deeper and more powerful jib for light and lumpy conditions. Secondly, blocking in front of the mast will create more headstay tension thus a flatter jib for windy conditions. The second effect is relative draft position of the lower part of the main. In lighter air blocking to induce pre-bend (behind the mast) will remove forward draft and decrease the depth of the sail. In heavy conditions you will want to block in front of the mast in order to power up the bottom part of the main in order to help you through rougher seas. Remember blocking in front also gives you more tension on the headstay for a flatter jib.


    Trim the mainsheet hard enough to make the top batten parallel to the boom. You can check this by sighting from underneath the boom on a vertical plane. Once the boat has accelerated and you want to point higher, trim harder (2-3") to cock the top batten slightly to weather. If the mainsheet is too tight (evident by the top batten hooking to weather), you will slow down. In light air and choppy water the top batten should be parallel or twist off slightly. You may want to mark your mainsheet somewhere in the middle so you have a nice reference point for mark roundings and upwind sailing. Pull the traveller car to windward until the boom is on the centreline. To check this have your crew sight aft along the boom and line up the centre of the boom with the eye that attaches the backstay to the boat (this should be in the centre of the transom). Keep the boom on the centreline up to 12 knots and gradually drop the traveller to keep the helm and heeling under control as the wind speed increases. The lens foot allows the sail to act as a loose-footed sail. Upwind the lens foot should not be fully open. To set your outhaul properly, use the following guide:


     Outhaul Tension

     0 - 5

     Eased 1 1/2 inches

     6 - 10

     Eased 1 inch

     11 - 14

     Eased 1/2 inch



    This chart is based on settings relative to the black band
    On reaches and runs the outhaul is eased 1 - 2".

    The cunningham is used to position the draft in the main. Your goal should be to keep the maximum draft position 50% back in the sail or just slightly forward of this. In a new sail we use no cunningham up to 6 knots, enough to remove most of the wrinkles in 7 - 14 knots and progressively tighter in higher winds so there are no wrinkles. Pull the cunningham very hard above 18 knots to move the draft forward in the top of the sail. Under most circumstances you do not need much backstay tension. The exception would be in breezy, extremely puffy conditions, particularly when combined with flat water. In these conditions, you can use the backstay as a power control. Pulling the backstay on reduces the power in the mainsail up high by opening the leech, thus reducing heel and weather helm. Remember backstay has a large effect on luff sag, a tighter backstay equals less luff sag, more luff sag makes the jib entry fuller and moves the point of maximum draft back, this is best in light air and flat water. As the breeze freshens, a straighter jib luff produces a flatter jib entry. Use the boom vang downwind and on the reaches to control the amount of twist in the mainsail. The twist should be the least amount that still permits attached flow at the upper batten tell tail, stalling is unavoidable. From 100 degrees or so to a dead run set the vang so the top batten is parallel to the boom. Your mainsail is equipped with a leech cord, the primary function of the leech cord is to prevent the leech from fluttering. In windy conditions tension the leech cord to prevent the leech from fluttering. In light to moderate conditions pull it just tight enough to eliminate flutter.


    Your North Sonar jib does not have a wire in it. Therefore luff sag is controlled by headstay tension (see blocking and backstay section of this tuning guide). Luff sag is measured as an offset from the centre of the jib luff to a straight line between the head and tack of the jib. To trim the jib correctly you must have the lead in the proper fore and aft position. This is accomplished by moving the lead forward or backwards until all three tell tails on your jib lift at the same time as you begin to pinch the boat above a close hauled course. If you find that the windward tell tail on the top of the sail lifts before the ones lower down, this is an indication that the lead is too far aft and should be moved forward. Conversely should the windward tell tail on the bottom of the sail lift before those higher, then you should move the lead aft. After experimenting in say 8 to 12 knots and you have your central lead position, you may want to move the lead forward a little in very light air and aft a bit when the breeze is above 15 knots. The most critical adjustment you will make with your jib is the sheet tension. The best way to gauge this is to pull the sheet in when you are going upwind until the upper batten is parallel to the centre line of the boat at the back end, or perhaps points just to leeward from parallel. In no instance do you want the upper batten pointing to windward towards the mainsail. This will create backwinding and stall the boat which will slow you down.

    Spinnaker and Downwind Sailing

    Set the vang so the top batten is parallel to the boom. Ease the cunningham, outhaul and backstay. Trim the spinnaker so there is 6" to 8" of curl in the luff. Keep the pole perpendicular to the apparent wind. Keep the outboard end of the pole even with the free clew. On runs you may want to use some leeward tweeker to keep the leeward leech from opening too much. Remember over trimming the spinnaker (never allowing the luff to curl) chokes down the slot between the spinnaker, leech and main, the result is a boat driven sideways instead of forward.

    Steering Technique

    The Sonar has a very big main, therefore, it is very important to balance the boat for different wind strengths. If your boat is not balanced, you will feel it in the helm. In heavy conditions you want to de-power the main in order to reduce windward helm. Since hiking is limited in the Sonar class, it is a good idea to sail with four people, you can use these people to your advantage by moving them around in the boat. Use crew weight to help steer the boat upwind as well as downwind. In light air keep the crew weight low and forward in the boat as the wind freshens move the crew weight to the windward rail and forward and close together. In all conditions playing the mainsheet, traveller and backstay will keep you in close tune with the helm. Remember, steering fast is a function of concentration and balance of your boat.

    Good luck on the water!

    Sail Numbers & Letters

    300mm (12”) Sail Letters & Numbers

    Please contact your local North Loft or Agent to make your order or for further details.

    Contact the Sonar Experts:
    Ruairidh Scott
    +44 (0)1329 443 430 Work
    Recent News

    J/80 Spanish Championship

    GUL B14 TT Series Round 3 – Whitstable
    North Sails powered boats 2,3,4

    Promotional Prices on all Optimist Designs!

    J80 French Championship

    Optimist Cataluna Championship
    Won by Nil Subirats