U.S. Nationals 1,3
Europeans 1
UK Nationals 1
Worlds 1,2


UK Nationals 1,3
Italian Open Champs


German Open
Primo Cup
UK Nationals 1,2
US Nationals 1
Italian Nationals 1
Worlds 1


Worlds 1,2,3
Bacardi Cup 
French Open 1,2
Europeans 1,2*
US East Coast Champs 1,3


Primo Cup 1 
North Americans 1,2,3
Grand Prix Crouesty 1
UK Spring Cup 1
U.K. Nationals 1

Follow Us!


North Sails has been, for many years, offering two sail lines, the Newport and the San Diego. By combining the best designs of each line we came up with a simplified sail line that guarantees speed and power to your program. Here are the sail designs that we recommend:

Fat Head J/24 Mainsail
1,2,3 2014 Worlds

The North Fat Head Mainsail may be the most successful J24 mainsail design, ever! The recent 2014 World Championship has shown, once again, no matter which North genoa best fits your sailing style, the FatHead main is the mainsail for top performance. The Fat Head Main is designed for easy setup with one set mast butt position so whether you are in light or heavy air or flat or bumpy seas, you can be confident that the setup and tuning with your Fat Head main will be correct. The hardest part about sailing with the Fat Head Main is deciding which North genoa to pair it with to maximize your speed potential.

J/24 Mainsail standard features:

  •  "WOW!Naturally we expected your sails to improved our performance, but theyfar exceed our expectations. Suddenly we're a boat to be contended within a very strong fleet of a dozen J-24s. It feels like a differentboat.Thanks for your typically excellent work"-- Dallas Murphy

    "We have never been so fast...There is no question your sails are superior!"-- Jeep Califano

    RBS Tapered epoxy battens
  • Vision/spreader windows
  • Leech cord
  • Shelf foot
  • Floating tack
  • Cunningham
  • Leech telltales
  • Sail number and national letters
  • Class Insignia
  • Long roll bag
  • Class royalty label
For prices and more information contact our J24 Experts or your

DX-7TT Twaron/Technora J/24 Genoa
#1 2014 J/24 Worlds!


The DX-7TT was developed to work in concert with the Newport FatHead Main which required a deeper, more forgiving J/24 Genoa. The 2014 World Championship winning design is constructed using the revolutionary black Twaron (aka Kevlar) and black Technora. The DX-7TT J/24 Genoa has enjoyed success in many venues, from the big breeze and chop of Newport to flatter water lake sailing but this sail really shines when your team is in full hiking mode! The Kevlar/Technora fabric does a great job in helping the sail hold it’s designed shape in bigger breeze which really helps match, this proven all-around performing sail, to many sailing styles. It is especially great for sailors who prefer a genoa with a little finer entry with the potential for higher pointing.

Genoa standard features:

  • Three vision windows
  • Telltale window
  • Tacking line
  • Cunningham
  • Sail numbers
  • Draft stripes
  • Long roll bag
  • Class royalty label

For prices and more information contact our J24 Experts or your

SD/TH J/24 Twaron/Technora Genoa
#1 2014 J/24 North Americans!
3rd at the 2014 Worlds!


The new and improved SD/TH Genoa is constructed from cloth that uses a blend of black Twaron (aka Kevlar) and black Technora. The Twaron is used in the load path for low stretch and the Technora is used off load for better durability especially with impact and flex that is inherent while tacking. The black coating in the cloth fibers helps protect reduce the damage that can be caused by the sun. The SD/TH also features lighter, reinforced patches and the foot round has been redesigned so less foot cord is needed thereby increasing durability. The exit of the sail is straighter to allow for tighter sheeting in moderate wind but with genoa leads forward it provides the power to punch through heavy chop. With a slightly fuller entry than the Newport DX-7TT this genoa is very forgiving to steer to in all conditions. The SD/TH performs exceptionally well in light to moderate wind conditions when a wide steering grove is needed. The SD/TH has won many regattas, including the 2013 Worlds and is a great choice for a fast, easy to trim sail that performs in all conditions.

Genoa standard features:

  • Three vision windows
  • Telltale window
  • Tacking line
  • Cunningham
  • Sail numbers
  • Draft stripes
  • Long roll bag
  • Class royalty label

For prices and more information contact our J24 Experts or your

Super Rocket Blade + J/24 Jib
1,2,3 2014 J/24 Worlds!

The new Super Rocket Blade + Jib features a tri-radial construction that makes it super low-stretch which is very important for a sail that will be used in 18-30 knots of wind. The design features a very straight exit which helps you to keep the boat flat. Ease the sheet 1/2" and the leech of this sail really opens up and de-powers!With the Super Rocket Blade Jib you will find the boat much easier to steer in the big breeze and heavy chop that this sail is designed for.

Jib standard features:

  • Vision window
  • Bronze hanks
  • Vision window
  • Long roll bag
  • Class royalty label

For prices and more information contact our J24 Experts or your

FR-2 J/24 Spinnaker
2,3 J/24 Worlds!
#1 2014 J/24 North Americans!

After many hours of on the water testing and computer studies by the North One Design designers, we are excited to have been able to offer a product that will made a significant difference how we race the J/24 especially on windward/leeward races. The FR-2 was based on and is a continuation of development of the successful SD spinnaker. Our testing showed that as we flattened the head the sail flies wider and the center seam is more upright improving projected area and speed. The bottom section has been refaired so the lower leeches fly more open underneath the middle of the sail. The objective was to make the sail fly more open up and down the luff. and the resulting shape allows the pole to be flown lower with more projection and a luff that breaks much more evenly along the entire height of the sail.

Spinnaker standard features:

  • Sail numbers
  • Sail bag
  • Class royalty label
  • Stock colours
For prices and more information contact our J24 Experts or your

Newport Slant Nose+ J/24 Spinnaker

The, long popular, Newport SlantNose+ spinnaker is still widely used by many competitive J24 teams. The enduring design, has many features that J24 sailors love. The sail is designed with extra stiff patches at the head and clews for maximum projection, tri-radial construction for durability and shape holding and is, arguably, the largest in the class in the lower one third of the sail making it a great all around performer especially when the breeze is up and the pole can be pulled aft.

Spinnaker standard features:

  • Sail numbers
  • Sail bag
  • Class royalty label
  • Stock colours
For prices and more information contact our J24 Experts or your

Tuning your J/24 for Speed

>> Download the North J/24 Tuning Guide (San Diego)
>> Download the North J/24 Tuning Guide (Newport)

>> Video presentations on mast tuning and sail trim

J24 FAQs:

What's the recommended tension for the backstay?

With regards to the backstay we thought having it off to measure the forestay would make it easier to get a method where all boats could be tuned the same. You are right that just hooking it up and even trimming the main effects how much the forestay will sag...

With that in mind we suggest (this is in the tuning guide) that the tension on the backstay bridle always be adjusted so the blocks sit about 8" below the triangle that joins everything together.. So each time you tighten or loosen the shrouds for a change in wind velocity you will need to do the same for the backstay bridle.

Can you give me some hints on how to go faster on a J24?

It is really important to sail at max weight 882 lbs. In anything above 10 kts, that extra weight is noticeable in terms of upwind performance. At the top of the fleet, we try really hard to make sure we are max crew weight.

Changing gears in the J24 is huge! The skipper has a lot on his plate. The top guys make the skipper responsible for the backstay, traveler, mainsheet, Genoa trim and steering the boat. Let me try to explain how this works. A nice steady breeze makes it a lot easier obviously. In the steady breeze you can kind of get things set up and just rumble. In a puffy breeze, there is a constant adjustment of the controls.

Puff hits…crew eases genoa, skipper eases traveler.

Puff begins to ease up,skipper pulls traveler back up, cleats it. Then moves quickly to the winch handle and cranks in the genoa.

Repeat the above sequence with each new puff.

There are different variations of this depending on-strength of the puffs. If the puffs are very strong…vang sheeting-becomes a little more effective. A super tight vang and using the process above, but instead of easing traveler down, you’re easing mainsheet.

The backstay should be set as close to a happy-medium as possible, but every now and then it should be adjusted based on the overall trend of the breeze. I like to have it eased in the light spots as much as possible, as long as you can get enough back on before the next big puff hits.

It would be nice to have three hands. Trust me it is not easy…it takes a lot of practice.

You want to start by getting your boom at centerline. You accomplish this with mainsheet tension and traveler. The mainsheet tension controls the amount of twist in the sail and leech tension. In light air or light spots, you want twist (and the top leech tell tale flying)…so softer mainsheet tension and a higher traveler to keep boom at centerline. A twisty main is also good for accelerating or for bow down modes. You want nice twist in your main after a tack to help the boat get back up to speed quickly. In medium breeze, you want a tighter mainsheet to close the leech a little for better pointing. You have to ease traveler down to keep boom at centerline if you pull on mainsheet tension. The only time you let the boom go below centerline and go traveler down is when you really need to de-power and keep the boat flat. Even before a lot of traveler down, I am usually putting on some backstay to de-power.

The backstay has a few rules of thumb. Take some off for more power and pull some on to de-power. If your main starts to invert and flog, you should ease some backstay to get flow over the sails going again. Backstay is more of a macro adjustment unless it is really puffy, then you are constantly easing it off in the light spots. Also, if you are ever overstood in breeze and need to crack off, put lots of backstay on. If you need to point higher in a short distance like if you understood the windward mark, take backstay off.

The Genoa trimming by the skipper is key. Basically the skipper sits right next to the winch that has a winch handle in place. In a puff the trimmer, who is hiking out all the way, will ease the genoa in anticipation of the puff, not letting the boat heal over (we’re talking like a foot or more of ease at times), and then the skipper winds the winch handle to crank the sail back in before the boat heals to windward. This takes some practice, but once you get it, it’s huge. Never let the boat heal to leeward. Anytime the boat is healing it is sliding sideways a lot faster than you think. When a 30 knot puff hits, you actually have better VMG if your boat stops dead in the water and remains flat, than if you heal over, go forward but slide sideways. The boat that stopped dead in the water will actually be closer to the windward mark after the exchange.

How often do we get new sails? The Genoa obviously takes the biggest beating. After only a couple heavy air regattas you will be able to notice a performance difference between a new and used sail. It’s not only the beating the sail takes against the mast in tacks, but also the crew stuffing it up on the bow during downwind sailing. You might not like to hear this but we make sure we have a new Genoa for every big event.

Quantum is pushing a material called AirX. What is you opinion and what type of material is the North Spinnaker made out of.

We make our sail out of a material called Superkote. Both, the Superkote and the AIRX 650 which Quantum uses weight very close to the minimum allowed weight of 42 grams per square meter. I have used AIRX on a number of J/24 spinnakers. My conclusion is that it makes a good sail but one that is best in flat water and a good breeze. The Superkote is actually a little softer which makes the sail more forgiving in any of waves and lighter winds. Superkote also seems to last a little longer as it relies more on the weave of the cloth for strength rather than a surface coating. / Answer by Chris Snow

I've been told J24s roll tack easy enough. Using techniques I adapted from dingy racing and a basic knowledge of hydrodynamics, I tested this theory and couldn't get it to roll over. Is there a better technique for fixed keels that i don't know about?

Roll facing out and push down on the windward life line. Start from the middle of the boat and do it all together. With four people rolling you should be able to get the windward rail all the way down to the water, once it is flatten the boat slowly and you will get a nice squirt forward.

What is your feeling about Newport vs San Diego cut. I sail in the Inland NW.

Sailing on a lake where the wind is shifty I would choose the San Diego designs. This sail is fuller in general especially in the middle which makes it more forgiving to trim in variable and shifty conditions. The sail can take quite a curl before it becomes unstable. The Newport is better in open water straight line sailing.

What is your opinion about having multi color sails. I read somewhere that it was better to have one color due to the stretch in the panels over time. Is this a big issue?

We highly suggest having the head and clews of the sail each a solid color. Also I would try to have these areas lighter colored if possible. This way the top and bottom of the sail is made from the same lot of cloth and it will stretch relatively evenly over the life of the sail. Also making the sail with lighter cloth in the top and bottom will insure that you are getting a sail made with Grade A woven cloth. With darker colors flaws can be hidden and even though all the cloth is tested by the maker and us this generally seems a safer bet. 

The tuning guides tell me about which ring to fly the pole from but as the wind builds I find that the floating tack sometimes wants to fly quite high. The question is once you have got the pole to horizontal, do you keep raising the pole to keep the kite level or do you use the barber hauler (twinning lines) to keep the floating tack down to the pole tack. Does water conditions affect your thinking on this?

Generally the J/24 likes the pole on the low side so while we try to keep the clews level we also work on keeping the pole end a little lower than the free flying end. We generally twing the pole side down enough that the pole will sit right up at the tack of the spinnaker at all times.

Generally do not use the leeward twing on a J/24. The boom acts as plently of a twing when needed.

What's the difference between the San Diego and Newport sails?

The mainsails ARE very similar. I know the San Diego sails well and have helped to develop these sails. About two years ago we made the main significantly flatter. The reason was that the J/24 likes the main trimmed really hard and for sure a flatter main can be trimmed harder before it stalls. Both mains are quite forgiving.

The San Diego genoa is touch flatter than the Newport genoa (The Newport main is flatter than the San Diego so needs a fuller genoa to go with it). We have found that the sail is really fast in the upper end conditions with the genoa where sailing the boat and keeping it flat is harder. In fact the sail was so good in a big breeze that we just made the top of the sail a little fuller to make it easier to keep the boat going in lighter air.

When to move the mast butt position?

There is no real reason to have to change the mast butt position once you find the proper location. Here we use a Loos Model B tension gauge and with the lowers on 21 and the uppers on 24 we measure the headstay tension with the backstay completely disconnected. The headstay will be loose and the tip of the gauge should be about 30 mm from the headstay if you have everything set up right. You will also have about 3 to 4 cm of prebend at this point. The only time I have seen adjsuting the butt while racing work is when it is really blowing hard (25 knots plus) and then moving it forward just a bit MIGHT help.

How to ease and trim the main and jib together smoothly? Well..easing isn't hard but since I grind the winch for the jib/genoa and pull in the main they don't come in together, it's always one or the other first. Both together is obviously better but I'm not sure how to do it. Do you have the cockpit guy grind in the jib himself and only worry about the main when both are eased or do I just try to do both myself. How do you do it?

You are talking about when you are cross sheeting the genoa and jib. Basically I think the best thing to do is if you just ease the jib a inch or two, you need to grind the sail back in a keep the cockpit guy hiking out.

Yes the sail will not be trimmed in exactly the same but I think this is less disruptive. If you have the ease the jib a lot (like when ducking) have the cockpit guy turn around and grind and tail the sheet him/herself. This way you can concentrate on the mainsail.

The balance between the two sails on a boat like a J with the a small keel is important. Keep playing the sails in concert with one another.

How can I get my J24 to point higher?

Generally the reason a J/24 does not point (or sail as close to the wind as the boats around it is because the boat is not developing enough weather helm. The boat needs a small amount of weather helm to be able to always sail as close to the wind as possible.

The first thing to do is to recheck your boat against the tuning guide to make sure you have followed everything correctly. If this is so then I like to go out sailing with the rig tuned properly for the wind and take a close look at the mainsail set up. Usually what you will find in these cases is that the lower part of the main to too flat relative to the top of the sail. In general the sail should have a nice smooth shape from top to bottom, often in cases where the boat is not pointing well the bottom of the main will be very flat right off of the mast indicating that we need to move the mast butt forward. Start by moving it ¼" and see if that makes a difference, it should make the lower part of the mast a lot straighter and give you more helm and height!

My J/24 sails nice and high but I can't get it to go as fast as the other boats through the water. What can I do?

You basically have the opposite problem of the folks in the question above. There are times in race where tactically you want to " put the bow down" and just go fast regardless of height. If your boat won't do this you are handicapped a bit. The problem is that your lower mast is too straight which makes the main too full and causes you too develop an excess amount of weather helm. Every time you try to sail the boat low and fast the boat heels too much and develops more weather helm. Move the mast butt back ¼" to put in more lower bend, recheck your shroud tensions and you should be all set.

Should I use the upper or lower ring on the mast for the spinnaker pole?

With the Newport spinnaker we use the lower ring until about 15 knots of wind. For the San Diego spinnaker use the lower ring until about 10 knots.

When I sail in heavy air with the jib I can't get the jib halyard tight enough to remove all the wrinkles in the luff of the sail?

Above 20 knots you want the luff of the class jib smooth with no wrinkles. To get the halyard tight enough sail downwind before the start with the backstay off and have two crew pull up the halyard. This should get it tight enough. Be sure to get the jib up BEFORE you tighten the backstay at the leeward mark. 

How important is the J/24 spreader angle adjustment? This seems to be hard to get right.

The spreader angle is hard to get right but it is worth the effort. The spreader angle affects how "stiff" the mast will be in the boat. Angle the spreaders forward and the mast gets stiffer, sweep back and the mast gets more flexible. This is important because as we tighten the backstay we need a certain amount of stiffness in the mast so the headstay will get tighter and flatten the genoa as the breeze builds.

If you have a older mast with "male" stainless steel fittings coming off the mast we suggest either retrofitting to a thrubar set up or using the Allis Racing style spreader adjusters. With a newer mast you may need to bend your thru bar to get the right angle (see your local machine shop).

Have a Question?Please contact the J24 Experts or your local North Loft or Agent for additional information and questions about our products.

Sail Numbers & Letters

300mm (12”) Sail Letters & Numbers

Please contact your local North Loft or Agent to make your order or for further details.

Contact the J24 Experts:
Arnd Howner
+45 3920 4090 Work
Recent News

J/80 Spanish Championship

GUL B14 TT Series Round 3 – Whitstable
North Sails powered boats 2,3,4

Promotional Prices on all Optimist Designs!

J80 French Championship

Optimist Cataluna Championship
Won by Nil Subirats

420 CIMA Regatta, Marseilles

GUL B14 TT Series Leg 2 Stokes Bay
A game of Snakes and Ladders

Paul Smith Memorial Regatta
Herne Bay Sailing Club 16th & 17th July

GP14 Worlds in Barbados

420 GBR Team Selection Results

420 Portuguese National Championship

Enterprise Midland Area Championship
Won by North Sails

420 Spanish Championship
North Sails 1st in the Overall & Womens Fleets

Melges 24 March Madness Regatta at Miami YC
North Sails 1,2,3

Melges 20 Interview: Drew Freides
Winner of the 2016 Melges Rock Regatta

Finn European Championship 2016

The NEW Full Optimist Sail Range for 2016
The new Japanese designed radial cut R1, R2 & R4 have now been released!

Dragon International Cannes Grand Prix

J/70 Experts Forum - Part Two
Heavy Air Performance - Moving Up the Fleet

J80 Trophy Akewuele
In Balis, Spain

J/70 Experts Forum - Part One
Starting and Event Strategies

420 VII Velanium Trophy
From Balis in Spain

When are "wrinkles" fast?
How do you tell the "fast" wrinkles from the "slow" ones?

Seavolution B14 Winter Pursuit Series – Round 4

Wing-on-Wing Instructions & Video

Key West: Black Seal Interview
Congratulations Richard Thompson and team Black Seal

INTERVIEW: Chris Doyle, J22 World Champion

VIDEO: Etchells multi-length battens