Mainsail (LGM-8) Range 2011 National Champion!
The LGM-8 all purpose range is NEW for 2012. These mainsails come
in two styles to suit all sailors requirements, ranging from paneled Kevlar laminate to our top of the range
thermo molded 3DL sail which offers a stronger more durable sail with
greater performance and longevity (more info. on 3DL can be found on our
technology page).
LGM-8K
Full Radial (Kevlar ATX-2MIL)
GBP £945.00
Euro €1134.00
| LGM-83DL
3DL (Carbon / Kevlar 680M)
GBP £1275.00
Euro €1530.00
|
Jib (LJ-3R) Range 2011 National Champion!
The LJ-3R range offers both Dacron and Kevlar laminate options with the Kevlar version perfectly complimenting the LGM-8K Mainsail and the Dacron matching the 3DL Mainsail. Both are all purpose jibs and built to our championship winning design. Both models come complete with battens, zip luff, tell tails and sail bag.
LJ-4D
Bi Radial (Dacron 4.46 Polykote)
GBP £385.00
Euro €462.00
| LJ-3RK
Full Radial (Kevlar ATX-2MIL)
GBP £475.00
Euro €570.00
|
Asymmetric Spinnaker (SS-04) 2011 National Champion!
The SS-04 is the famous Simkins design spinnaker. Designed for windward leeward racing, with extra projected luff which enables you to sail lower without loss of speed, ideal for championship racing. With it's full radial construction the sails cut from Dynakote 75, a silicone coated cloth, to help gybes and drops.
SS-04
Full Radial (Dynakote 75)
           
GBP £755.00
Euro €906.00
|
Asymmetric Spinnaker (RS-2)
Designed to be flatter than the SS-04, the RS-2 offers a great balance between the versatility needed for championship racing and the ultimate top speed offered by flatter sails. Ideal for bigger courses and championship racing. It is cut from Dynakote 75, a silicone coated cloth, to help gybes and drops.
RS-2
Full Radial (Dynakote 75)
GBP £755.00
Euro €906.00
|
All prices above "EXCLUDE" local VAT & delivery charges.
Please contact the
B14 Experts or your local
North Loft or Agent for additional information and questions about our products.
This Tuning Guide has been prepared to help you get the best out of your North Sails. This is meant as a starting point, feel free to modify and experiment in small steps to find what suits you best. If you find a Setting or Settings that really works, please keep us informed.
Mast Position
The aim of the B14 settings is to keep the lower ¼ of the mast as straight as possible. To achieve this you will need to move the mast foot as far forward as is possible, and use a small chock in front of the mast at the mast gate. The size of the chock will vary and you will need to set this by looking up the mast when it is tensioned and checking it is straight.
On The Water Tuning
Because the rig is very simple, there are not a lot of changes you can make while you are on the water. There are your normal sail controls, the jib tack height and the centre board.
Cunningham
As you start to become overpowered start to pull on the cunningham a little, as the breeze increases progressively pull on more.
Jib tack height
The jib tack height is the only control for the sheeting angle of the sail. Lowering the tack will increase the twist of the sail. If the conditions change you can alter the tack height between races, lowering the sail if the breeze increases and raising it if the breeze drops.
Centre Board
As with the jib, the centre board can only really be adjusted between races. If you feel the boat ‘tripping up’ over the board in breezy conditions raise it up.
As a guide:
15-20kts: 150mm (6”)
20kts+: 300mm (12”)
Notes
Tensions are found with Loos PT1-m rig tension gauge.
The spreaders are measured from a straight line between the shrouds to the back of the mast track, without rig tension. The holes are a bit of a course adjustment so you might not be able to exactly match these figures. If in doubt go slightly further forward on the lowers and slightly further back on the uppers, if possible try to keep the 2 sets of spreaders in line or the upper set slightly aft.
Good luck on the water!
North Sails boat covers are built to the highest standards and manufactured using top quality materials and hardware. We have looked at each class of boat individually and designed the cover to suit the specific characteristics of the hull, spars, rigging and foils.
| | |
Breathable Top Cover
| | GBP £240.00 | Euro €288.00 |
Breathable Cocoon Cover
| | GBP £380.00 | Euro €456.00 |
Bottom Cover
| | GBP £145.00 | Euro €174.00 |
Breathable Mast Bag
| | GBP £145.00 | Euro €174.00 |
Breathable Foil Bag
| | GBP £100.00 | Euro €120.00 |
Toe Straps
| | GBP £55.00 | Euro €66.00 |
Kicker Sock
| | GBP £22.00 | Euro €26.00 |
Main Batten Set
|
| GBP £105.00
| Euro €126.00
|
300mm (12") Sail Numbers & Letters
| | GBP £1.55
| Euro €1.86
|
All prices above "EXCLUDE" local VAT & delivery charges.
To find out more about the materials used in our cover designs please visit our Technical Information page.
Please
contact us or your local
North Loft or Agent to make your order.